Installation guide

54
55
Firmware Upgrade
Note: In order to perform a rmware upgrade, you
need to use a computer that’s not connected to
the KVM.
Step 1
Connect the provided rmware upgrade cable
to the rmware upgrade port of the KVM and
the serial port of your computer. Connect power
adapter to your power outlet and the KVM.
Step 2
Go to www.iogear.com to download the latest
available rmware or the specic rmware that you
wish to upgrade to.
Step 3
Please make sure all the computers that are
connected to the KVM are completely shutdown.
Then Invoke Firmware Upgrade Mode. (Please
refer to OSD Operation section)
Step 4
Extract the le with WinRAR or compatible
software. Then double click on the execute le to
begin with the Firmware Upgrade Utility.