Wireless USB Print Adapter with Bluetooth Technology User Manual (GBP201)
Welcome Thank you for purchasing the IOGEAR wireless USB print adapter with Bluetooth technology. This print adapter is a first rate connectivity accessory designed to help reduce the frustration of dealing with cables in your home or office. IOGEAR wireless USB print adapter with Bluetooth Technology allows Bluetooth enabled computers to send print job wireless to USB printers. ©2004 IOGEAR. All Rights Reserved.
Table of Contents Package Content Overview Features ○ ○ ○ ○ Installation Operation ○ Specification ○ ○ ○ ○ ○ ○ ○ Technical Support ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 2 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Package Contents This package contains: 1 Bluetooth print adapter 1 USB B-B cable 1 User manual 1 Warranty registration card * If any items are damaged or missing, please contact your dealer.
Overview IOGEAR’s palm sized single-port Wireless USB Print Adapter with Bluetooth Technology allows any Bluetooth enabled computer to wirelessly send print jobs to a USB printer. It complies with USB 1.1 specifications and the Bluetooth 1.1 specifications. It supports data transmission rates of up to 723 Kbps, and a wireless access range of up to 66 ft (20 meters). This unit supports HCRP (Hardcopy Cable Replacement Profile) and SPP (Serial Port Profile), all of which resides on onboard flash memory.
Features • Allows any Bluetooth enabled computer to wirelessly send the print job to a USB printer • Plug and Play, easy to install • Bluetooth Class 2 device with a 66 ft range (20 meters) • Supports data rate of 723 Kbps • Supports Pico-net and Scatter-net and up 7 devices • Complies with USB 1.1 specifications and the Bluetooth 1.
System Requirements • Printers with USB interface. * Multi function printers not supported. • Bluetooth enabled computers.
Introduction 1. USB Port – connect to the USB printer. 1 2. Power LED – Red after powered on. 3. Link LED – Flashes green after powered on. 4. Power – 5V, 1A.
Installation First of all, the computer that you plan to print from needs to have the printer driver, the easiest way is to install the printer driver first. Due to the fact that all printer manufacturers have somewhat different procedure to install the printer driver, we do not cover the printer driver installation in this manual. Also, we do not cover the procedures of installing Bluetooth driver to your computer, we assume the computer is already Bluetooth enabled.
Installation 1. From the Bluetooth enabled computer, click the Bluetooth logo on your screen, then click My Bluetooth Place, then select Entire Bluetooth Neighborhood.
Installation 2. You can see that the computer starts searching for the Bluetooth devices within the range.
Installation 3. Double click on the icon of the IOGEAR Bluetooth adapter. Click OK on the prompted question. (This question would not be prompted if the printer driver is already installed.
Installation 4. The following window will be prompted for you to select the appropriate driver. (This step would be skipped if the printer driver is already installed.
Installation 5. Select the appropriate driver, or click on “Have Disk…”. Follow the installation step provided by the printer manufacturer. 6.
Installation 7. Right click the printer icon (in this case the Epson C62), select Properties from the drop down menu.
Installation 8. Select Ports on the Printer Properties screen, and check the IOGEAR print adapter port, then click OK.
Installation 9. The installation is done. You can print a document to test it, this printer should be on the printer list already, as shown in the following window.
Installation Or, you can click open the printer Properties page again and select Print Test Page.
Operation After the print adapter is installed and the test page has printed fine, you will be able to print wirelessly just as if the printer is connected directly to your computer. You should be able to see the printer in the screen similar to the following print screen: This print adapter can be paired to up to 7 computers, the print jobs will be handled on a first come first serve basis.
Specification 18
Technical Support If you need technical support, please check out our IOGEAR Tech Info Library (T.I.L.) at www.iogear.com/support for the latest tips, tricks, and troubleshooting. The IOGEAR T.I.L. was designed to provide you with the latest technical information about our products. Most of the answers to your questions can be found here, so please try it out before contacting technical support.
Radio & TV Interference Statement WARNING!!! This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose.
Contact info. 23 Hubble • Irvine, CA 92618 • (P)949.453.8782 • (F)949.453.8785 • www.iogear.
