Installation Manual

Thermostat Setup
The Zone One, two position, stand-alone damper assembly can be controlled with the UT32
Universal Touchscreen Thermostat. Refer to the Installer and User Manuals included with
the thermostat for proper configuration based on application requirements.
It is highly recommended that the thermostat be placed in the Auto Changeover mode of
operation for proper damper control of both heating and cooling calls.
Remember, the thermostat does not control the HVAC equipment and only controls the
zone damper as per the sequence of operation of the Zone One system.
iO-06-1238-042219
HVAC Controls
Indianapolis, IN 46237
www.iohvaccontrols.com
For Technical Support Call Toll Free: 866-225-5032
D-Z1-XX & D-Z1-XXXX