Install Instructions

UNPAIRING TRANSCEIVERS
Unpairing a base and satellite transceiver is accomplished by holding down the button
while applying 24VAC and continuing to hold the button down for about 5 seconds. While
the button is held down, the LED will flash between red and green 5 times per second.
Once the unpairing process is complete, the LED will flash as described in the pairing
section. If the button is released prior to the completion of the unpairing process, the
transceivers will transition to the paired mode, retaining their previous paired status.
SPECIFICATIONS
Power: 24VAC, 2.8VA
Channels: Base: 3 Send - 1 Receive Satellite: 3 Receive - 1 Send
Contact Rating: 1 Amp per channel
Frequency: 915MHz Operation
Range: Up to 1,320 ft.
Dimensions: 2-5/8” W x 5-1/8” H x 1-1/8” D
COMPLIANCE
T
he iO-WRP Wireless Relay System has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy, and if
not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet or circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
TECHNICAL SUPPORT
iO HVAC Controls is committed in providing the highest level of technical support. If you are
experiencing difficulty with your iO-WRP installation and require trouble shooting
assistance, call 866-225-5032. You can also learn more about our products by going to
iohvaccontrols.com.
5