User Guide

F
o
r
S
a
m
s
u
n
g
Us
e
On
l
y
Marvell RAID Utility User Guide
Using the Software 2-19
4. In the RAID Level box, select a level.
Table 2-1 lists the minimum number of drives required for each RAID level.
5. In the Adapter box, select the appropriate adapter.
6. Click on the specific SATA and PATA drives to create the RAID of your choice.
7. Click NEXT.
Note: If the combination of selected drives is not supported by the particular RAID level, an error
message appears reminding you to select the appropriate number of drives.
The second Create Logical Drive window appears, as shown in Figure 2-10, and for setting
the properties.
Table 2-1 Raid Level
RAID Level Number of Drives Required
RAID 0 Any number
RAID 1 2 only
RAID 10 4 only