Instruction Manual
Table Of Contents
- Glossary of terms
- 1. This manual
- 2. Safety
- 3. Get to know SBV System Series
- 4. Functioning principles
- 4.1 Sensor functioning principles
- 4.2 Detection fields
- 4.3 Safety working modes and safety functions
- 4.4 Safety working mode: Both (default)
- 4.5 Safety working mode: Always access detection
- 4.6 Safety working mode: Always restart prevention
- 4.7 Restart prevention function: static object detection option
- 4.8 Features of the restart prevention function
- 4.9 Muting
- 4.10 Anti-tampering functions: anti-rotation around axes
- 4.11 Anti-tampering functions: anti-masking
- 5. Sensor position
- 6. Installation and use procedures
- 7. Maintenance and troubleshooting
- 8. Technical references
- 9. Appendix
I
Inclination
Sensor rotation around the x-axis. The sensor inclination is the angle between the center of the field of
view of the sensor and a line parallel to the ground.
M
Machinery
The system for which the dangerous area is monitored.
Monitored area
Area that is monitored by the system. It is composed of all the detection fields of all the sensors.
O
OSSD
Output Signal Switching Device
R
RCS
Radar Cross-Section. Measure of how detectable an object is by radar. It depends, among other factors,
on the material, dimension and position of the object.
T
Tolerance area
Area of the field of view where detection or not of a moving object/person depends on the
characteristics of the same object itself.
SBV System Series| Instruction manual v1.2 DEC 2021|SAF-UM-SBVBus-en-v1.2|© 2021 Inxpect SpA
v