Installation Instructions

Plug the network cable into the eth-
ernet port on the OneKEY Manager.
Follow the screen prompts to set up
the OKM
Note: If not using Access Manager, it
is not necessary to connect the OKM
to the internet.
7c
The LED on the back of the OneKEY
Manager will illuminate, indicating that
it is receiving power.
7b
88
Select the Language. Conrm by
pressing “Yes”.
Note: Not all languages may be
supported at the time of launch.
Additional languages will be added
through periodic updates.
Section 3: Enrolling the OneKEY
Manager (OKM) in Access
Manager
Before beginning, ensure that you have a valid
InVue Access Manager account and
the following information
• Your Site URL
(for example “https://customer.invue-am.com”)
• Your Manager PIN
• Your Administrator User Name & Password
• Your Adminstrator User Pin
• Your OKM Installer Code (not needed if
using the OKM without Access Manager).
• The TCP port for the OKM
If you do not have any of these credetials, please
reach out to the InVue Customer Service Team.
• NA / LATAM // 704.752.6513 • 888.55.INVUE
• EMEA // +31.23.8900150
• APAC // +852.3127.6811
99
Select “Yes” to proceed and enter
your OKM Installer Code.
Select “No” if not using Access
Mananger.
1010
Enter your OKM Installer Code.
1111
Select which option best suits your
installation
• Auto Connect (DHCP) - Best suited
for most installations
• Manual Connect (Static IP) - Will
need to be coordinated between your
IT department and InVue Customer
Service
• Proceed without Connection -
Select this is not using Access
Manager and not connected via
ethernet.
1212
The OKM will display a connection
status screen.