Installation Guide

1
0 Secure the Device
Finally, secure the device on the bottom to the mounting
plate with the Metal Mounting Plate screw provided
in the IXM Install Kit.
9 A
ttach the Device
Take the IXM device and unscrew the Temporary Back Cover,
keeping the screws handy. Connect the Wired Back Cover to
the back of the device by lining up the connectors. Secure the
Wired Back Cover with the same screws. Next, hang the IXM
device onto the mounting plate as shown
in the series of diagrams below.
1
2
INVIXIU
M
3
25
Copyright 2019
INVIXIUM