Instructions / Assembly

ManualsBrandsInvisiDoor ManualsKitchenHinge Hardware Kit for Interior Door Slab

nvisi

oor

Required Tools:

Cordless drill/screwdriver

Drill bits-3/32” and 5/8”

Level

1/4” Hex driver

3/8” Radius roundover bit

Preparation

●

Check the opening into which the Invisidoor will be installed to verify that it is

plumb and level. Correct operation and appearance of the Invisidoor requires that

the opening be level and plumb or you need to make accommodations for it.

●

The Invisidoor pivot hinge is designed to be installed with the bottom hinge

plate secured to stable, solid wood. Verify that the  oor of the opening has

adequate support for weight of the unit and holding power for the screws.

●

It is recommended that you test mount the hardware and install the Invisidoor prior

to applying stain and  nish coat. This will eliminate the chance of damaging the

 nished product during the process of mounting the hinges and adjusting the unit.

Installation Instructions: Hinge Kit

The Invisidoor hinge kit is designed to o er a durable hinge system for a

hidden door with the easiest installation on the market. The hinge was

engineered to o er versatility for the Invisidoor universal bookcase which

can be hinged left or right for an inswing or an outswing door. The hinge

kit o ers you the same versatility and ease of installation for your custom-

made hidden door. The Invisidoor hinge kit includes the four powder-

coated steel hinge plates, the universal support foot, and all the fasteners

needed for each.

Summary of content (4 pages)

PAGE 1
Invisi Door The Invisidoor hinge kit is designed to offer a durable hinge system for a hidden door with the easiest installation on the market. The hinge was engineered to offer versatility for the Invisidoor universal bookcase which can be hinged left or right for an inswing or an outswing door. The hinge kit offers you the same versatility and ease of installation for your custommade hidden door.
PAGE 2
Building the bookcase Dimensions given with these instructions are based on the size of the universal Invisidoor (for a standard 36” opening) to assist you in sizing your bookcase and finding the appropriate hinge locations. Modifications to the width or depth of the book case will likely cause you to modify the location of the hinge pivot point.
PAGE 3
Use diagrams to install hinge plate #3 to threshold/floor. Place the two steel washers and the bronze bearing onto the hinge pin as shown. 1” 4” 6” Hinge Plate #3 on threshold 1-3/4” Outswing Inswing Install a hinge plate #4 to the upper jamb. Shim the jamb as needed at location of pivot hinge for a solid mounting area with longer hinge plate screws mounted into header for final installation.
PAGE 4
Install Bookcase For an outswing door, you will work from the backside of the Invisidoor to put it into place on the lower hinge pin and install the capscrew through the top. Lift the bookcase into the opening. Set the hinge on the bottom of the bookcase onto the pin of the hinge plate on the threshold. Align the upper hinges and screw the set screw into the hinge plate on the header. Use of Locktite can prevent set screw from twisting loose over time.