Instructions / Assembly

Install Hardware to Floor
Install Hardware to Bottom of Bookcase
Begin by deciding where the door will mount in relation to the opening. The bookcase can
pivot on the left or right. All diagrams are shown with pivoting hardware mounted on the
right side of bookcase.
The baseplate and track will both be mounted to the  oor centered 5-1/2” away from the wall.
Be sure that the track and baseplate are in a straight line that is parallel to the wall. Using the
provided dimensions to mount hardware will allow the bookcase to clear the wall and trim up
to 1/2” thick when pivoting. Modify dimensions if your application requires more clearance
between wall and bookcase (Fig.#1).
5-1/2”
9”
13-3/4”
To achieve full access to entire opening, the pivot point must be mounted to the  oor at least 13-3/4”
beyond the opening. Some applications may be better suited centering the bookcase in front of the
opening (Fig.#2).
Mount the supplied 2 x 4 mounting block to
the bottom of the pivoting side of the book-
case. Drill a 5/8” relief hole at the center of
the hole location shown. Drill 1” deep. Fasten
plate to the bottom of the pivoting side of
the bookcase. The plate should be  ush with
the bottom of bookcase (Fig.#3).
Fasten wheel assembly to the bottom of the
rolling side of the bookcase. The bearing
surface of the wheel should extend 1/8”
below the bottom of the bookcase so it
clears the track (Fig.#4).
4-1/2”
to
center
1-3/4”
1-3/4”
1-3/4”
4-1/2”
to
center
Be sure that the track and baseplate are in a straight line that is parallel to the wall. Using the
provided dimensions to mount hardware will allow the bookcase to clear the wall and trim up
to 1/2” thick when pivoting. Modify dimensions if your application requires more clearance
provided dimensions to mount hardware will allow the bookcase to clear the wall and trim up
to 1/2” thick when pivoting. Modify dimensions if your application requires more clearance
1/8”
Wall
Wall
Wall
Wall
Opening
(Fig.#1)
(Fig.#2)
Wood
2 x 4
(Fig.#4)
Track
Wheel
Assembly
5-1/2”
7” maximum
Top view
between wall and bookcase (Fig.#1).