Spec Sheet

• 2 Megapixel (1920 x 1080) Resolution
• Fixed Lens
• H.264/MJPEG
• True Day/Night
• D-WDR
• 100’ IR Range
• IK10 Vandal Resistant
• IP66 Weather Resistant
• ONVIF
• 12VDC/PoE Operation
• Free Central Management Software (CMS) to manage
multiple units & sites from a single platform
• Free iOS & Android Apps for Smart Phones & Tablets
• Free Mac Client
ULT-P2DRIR28: 2 Megapixel Dome, 2.8 mm Lens
ULT-P2DRIR6: 2 Megapixel Dome, 6 mm Lens
Model Number ULT-P2DRIR
Image Sensor 1/3′′ progressive scan CMOS
Min. illumination 0.01 lux @ F1.2, AGC ON, 0 lux with IR
Shutter time 1/30s ~ 1/100,000s
Lens 2.8mm @ F2.0, angle of view 52° (6.0mm optional)
Lens mount M12
Day & night ICR
Wide Dynamic Range DWDR
Video compression H.264 / MJPEG
Bit rate 32 Kbps ~ 16 Mbps
Dual stream Yes
Max, image resolution 2MP CMOS,(1920 x 1080)
Frame rate 60 Hz 30 fps (1920 x 1080), 30 fps (1280 x 720)
Image settings
Saturation, brightness, contrast adjustable through client
software or web browser
Network storage NAS
Alarm trigger
Motion detection, tampering alarm, network disconnect, IP
address conict, storage exception
Protocols
TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP,
SNMP, HTTPS, FTP, 802.1x, Qos
System Compatibility ONVIF, PSIA, CGI
General functionalities
Flickerless, heartbeat, mirror, user authentication, video
mask, watermark
Communication interface 1 RJ45 10M/ 100 M Ethernet interface
Operating conditions
-22 °F ~ 140 °F (-30 °C ~ 60 °C) humidity 90% or less (non-
condensing)
Power supply 12 VDC +/- 10%, PoE (802.3af)
Power consumption 7W Max.
Impact protection IK10
IR range up to 100 ft
Dimensions Ø 4.4′′x3.2 (′140 x 92mm′)
Weight 1.32lbs (600g)
ULT-P2DRIR
2 Megapixel IP Plug & Play, Outdoor Vandal Dome, 100’ IR Range
12VDC/PoE Operation]
Features
Innovative Video Technology 355 Oser Avenue, Hauppauge, NY 11788 | 631-388-5700 | [e-mail] | www.invidtech.com
Ordering Information
InVid Tech, reserves the right to make changes to improve our products at any time without notice; we are not responsible for misprints.
*To use these mounts with the selected cameras drill the holes needed into the mount using the diagram included with the camera.