Product Manual

SERVICING AND CLEANING
SERVICING
This product contains hazardous voltages and energy hazards that may
cause death or injury. Only qualified service personnel may service the
MiniBoostPRO. Do not attempt to service the MiniBoostPRO yourself, OR
dismantle, modify or repair the MiniBoostPRO yourself; this will void your
warranty. If your MiniBoostPRO requires servicing, please consult your
BMPRO dealer or visit teambmpro.com for assistance.
CLEANING
Use a dry or moist cotton cloth to lightly remove dust or dirt from the
MiniBoostPRO. Do not immerse the MiniBoostPRO in water. Do not use
alcohol, thinners, benzene or any other chemical cleaner as these products
may degrade the housing surface.
FAQS
1. Can I use the MiniBoostPRO inside my engine bay?
The MiniBoostPRO cannot be used inside an engine bay as it is rated to
IP20.
2. Does the MiniBoostPRO connect to home solar panels?
No, the MiniBoostPRO will not connect if the voltage rating of your home
solar panels is over 25V.
3. Can I run my appliances directly from MiniBoostPRO without any battery
being connected to it?
The MiniBoostPRO works only when the battery is connected to
the output. You can connect your appliances to a battery, but the
MiniBoostPRO output will have to be connected at the same time.
4. Can I cut MiniBoostPRO leads shorter for practical wiring?
This is not recommended as this could degrade the MiniBoostPRO’s
functionality. Refer to recommendation of a service centre.
5. Is the MiniBoostPRO housing electrically isolated?
No, as this is due to the MiniBoostPro’s housing being physically and
electrically connected to the negative terminal. Always be cautious of
accidental connections from the housing to the battery positive terminal.
21