Product Manual

BATTERY CHEMISTRY SELECTION

The MiniBoostPRO’s green battery chemistry cable is used to select the

battery chemistry (Figure 5,6,7). Setting the correct battery chemistry

ensures that the appropriate voltage levels are set for charging (Table 3).

Selecting 12V

AGM/WET Battery

When using the

MiniBoostPRO

to charge a 12V

AGM/Wet Battery,

terminate the

green wire, leaving

unconnected. This

will set the output

voltage at 14.4V.

Figure 6: Selecting the 12V AGM/ WET Battery

Figure 5: Selecting the 12VGel Battery

Selecting 12V Gel

Battery

When using the

MiniBoostPRO to

charge a 12V Gel

Battery, connect

the green wire

to the battery

negative terminal

or connect to the

common negative.

This will set the

output voltage at

14.2V.