Product Manual

WIRING INSTRUCTIONS
CABLE SIZE
Cables should be sized to carry 30A. Table 1 demonstrates the recommended cable
size, ranging up to a total length of 15m from input to output.
Table 1: Recommended Cable Size
CABLE CABLE COLOUR MINIMUM CABLE SIZE
Solar In
White 6.0mm or 10 AWG
Aux In
Orange 6.0mm or 10 AWG
Batt Out
Red 6.0mm or 10 AWG
Common Negative
Black 6.0mm or 10 AWG
Ignition
Blue 0.34mm or 22 AWG
Batt Chemistry
Green 0.34mm or 22 AWG
WIRING AND CONNECTIONS
To assist with wiring, cable colour codes are labelled on the back of the
MiniBoostPRO. To ensure safe and reliable wiring, wire connections should be
crimped or soldered. All wire connections must be protected by heat shrink to
prevent exposed wires.
The MiniBoostPRO may be used in conjunction with a BMPRO Power Management
System such as the BatteryPlus35 or J35.
If using a Power Management System, connect the MiniBoostPRO’s Batt Out
and Common Negative cables to the positive and negative primary input. The
MiniBoostPRO may be wired direct to the secondary battery via a protective fuse.
11