Operation Manual

CHRONOGRAPHS WITH BIG DATE AND DAY
Measuring Intermediate Time
1.
Start: Press push-button A. The center sweep hand will begin measuring
seconds.
2.
Stop: Press push-button B. This will indicate intermediate time.
3.
Start again: Press push-button B again.The hands will turn at a much
faster speed until they measure the time elapsed since the chronograph
was first started. They will then continue to move at a normal speed.
4. A further intermediate time can be measured
by repeating this
procedure.
2.
Stop: Press push-button A and read the 3 chronograph counters.
6.
Reset: Press push-button B. The chronograph hands will be reset to
their zero positions.
CHRONO
GRAPHS WITH BIG DATE AND DAY
Measuring Accumulated Time
1.
Start: Press push-button A. The center sweep hand will begin measuring
seconds.
2.
Stop: Press push-button A. Read the 3 chronograph counters.
3.
Resume timing: Press push-button A again.
4.
Stop: Press push-button A. Read the 3 chronograph counters.
5. Repeat this process as many times as needed.
6.
Reset: Press push-button B. The chronograph hands will be reset to their
zero positions.
40
41