Use Instructions

15.3 Invia Ease IV pole/bed holder
To attach the IV pole/bed holder to an IV pole or a bed board (up to 50 mm):
2. Position the open holder in the center of the IV pole
or over the bed board.
3. Turn the knob to the right to firmly secure the holder
onto the IV pole or the bed board.
To mount the Invia Ease pump onto the IV pole/bed holder:
To remove the Invia Ease pump from the IV pole or the bed board:
1. Hold the pump by the handle and lift the pump up to release it from the IV pole/bed
holder.
1. Turn the knob left to open the IV pole/bed holder.
1. Hold the pump by the handle and position the base of
the handle over the IV pole/bed holder.
2. Slide the pump down along the handle until the IV pole/
bed holder is secured to the pump handle.
48 |
Accessories setup