Manualshelf

Use Instructions

ManualsBrandsInvia Ease ManualsElectronicsThe Invia Ease pump is a suction pump designed to help promote wound healing through Negative Pressure Wound Therapy.
21222324252627282930
EN
Operating instructions | 29
8.11 Detach the pump from the patient
2. Position the clamps next to the Quick-Connector and
close clamps on the canister tubing and the dressing
tubing.
3. Disconnect the canister tubing from the dressing tubing
by pressing the sides of the Quick-Connector. Prevent
the end of the dressing tubing from becoming contami-
nated.
4. The patient can perform the activity while being disconnected from the pump, such as
taking a shower.
5. When the activity is completed, re-connect the canister tubing to the dressing tubing.
For instructions, refer to chapter “Connect canister tubing to dressing tubing” on page 24.
i
1. Click and hold for 3 seconds on the Main screen.
For instructions to detach from the pump click on the Pause screen
To exit the instructions at any time, click
i
i
NOTICE
To detach the pump from the patient, therapy must be paused.