Datasheet

For purpose of brevity, some product descriptions in this sheet remain at platform level and may not be referred to as detailed datasheets of the products.
Inverto Digital Labs reserves the right to amend, omit or add products, product-lines, and / or features without notice.
For further details contact: [e-mail]
FTA Communication Technologies S.à r.l. Tel. [phone] Fax. [phone]
V150518
Frequency range
Satellite (LNB/Multiswitch and receiver ports)
Wireless connectivity
Interfaces
LNB/Multiswitch
Receiver
PC (data)
Wireless data
DC input
Loop-through loss (Satellite)
LNB/Multiswitch control protocols
Display and keys
Power supply
DC input
SatPal™ Controller
(without power supply to LNB/Multiswitch)
Power supply to LNB/Multiswitch
Operating temperature
Dimensions
Certificates
950 MHz ~ 2150 MHz
2.4 GHz
1x Satellite IF, 13 V / 18 V DC out, 0 kHz / 22 kHz, F-type
1x Satellite IF loop-through out, 13 V / 18 V DC in, F-type
1x PC data communication, micro USB
1x IEEE 802.15.1 Low Energy (ver. 4.0)
1x DC input, micro USB
1 dB max.
DiSEqC™ 2.0, EN50494 (Unicable/SatCR), EN50607 (Unicable II™/dCSS)
Status LED
Wireless connectivity LED
Power LED
Function button
Satellite signal strength bar (0% ~ 100%)
Satellite signal quality bar (0% ~ 100%)
5 V ~ 6 V DC / 13 W max. (DC in, micro USB)
10 V ~ 20 V DC / 13 W max. (IF loop-through, F-type)
5 V DC, 350 mA (can be powered over the USB data interface)
14 V ~18 V, 400 mA max.
0 °C ~ +45 °C
150 mm x 100 mm x 30 mm (W x D x H)
Low Voltage Directive (2014/35/EU)
Electromagnetic Compatibility Directive (2014/30/EU)
Eco-Design Directive (2009/125/EC)
Radio Equipment Directive (2014/53/EU)
Technical data
SatPal™ package content:
▪ 1x SatPal™ Controller
▪ 1x Portable battery
▪ 1x Neck strap
▪ 1x Car charger
▪ 2x Micro USB cables (data/power)
▪ 3x Battery holding bands
▪ 1x Quick guide
▪ 1x Carrying case
SatPal™ app for iOS and Android