Operation Manual

8
Step2:
Anewmenuisdisplayed:UserPreferences–step2/3
Ingeneral,youdonotneedtomodifythesettingsinthisdisplay.
Ifyouwanttosetupspecicsettings,thenmodifythelinesaccordingto
yourpreferredsettings,usingtheremotecontrol.
OnceyourselectionsareOK,pressExitontheremotecontrol.
Step3:
TheAntennaSettingsmenuisdisplayed.
Ifyouhaveanactiveantenna,pleaseselectONwiththeremotecontrolin
theactiveantennaline.Thisoptionprovidespowerforactiveantennas,
suchasampliedantennas.
Pressexitwhennished.
Youhavenishedtheinitialconguration.Nowtheproductwillautomatically
startthechannelsearch.Thismaytakeseveralminutes.
WhentheChannelSearchiscomplete,thelistofchannelsfoundwillbe
displayed.
PressSaveandExit(greenbuttonontheremotecontrol).
CONGRATULATIONS:youhaveconguredyourproduct.Youmaystart
watchingandrecordingprograms.
Note:
Thebehaviourofthereceiverafterswitchingonorpowerupdependson
the“Power-upMode”settings(seethechapterPowerUpMode)
Note:
Inordertosetthecorrectvideooutputtypeofyourdigitalreceiverpress“Menu“+“Settings“+“Audio/VideoSettings“(seethe
chapterAudio/Videosettings)