Operation Manual

6
In case your TV set is equipped only
withaCVBSinputsocket,youcanuse
theCVBSoutputonthedigitalreceiver
and connect your TV set via cable to
provide optimum quality of the video
signal.ToprovideaudiosignaltotheTV
setitisnecessarytoconnecttheAudio
L/Routputonthedigitalreceiverwiththe
audioinput on yourTVset. In addition,
use an RF antenna (coaxial) cable to
connectthe“RFOUT“onthemodulator
withtheantennainputsocketoftheTV
set.Inthisway, theterrestrialantenna
connectionisloopedthroughthereceiver
totheTVset(seepicture7).

1.1.3. Connection to a DVD or
video recorder
Just as the TV set, the DVD or video recorder is
connected to the receiver via a SCART connection.
Use the VCR SCART socket for this purpose (see
picture8).
If you also have a video recorder connected to the
terrestrial antenna cable, this terrestrial antenna
connection should run rst from the receiver to the
video recorder and only from there to the TV set.
Asinacasetheaudioandvideosignalshavetobe
modulatedforhigh-frequencytransmissiononaUHF
channel,signalqualityisnotasgoodcomparedtoa
connectionwithaSCARTcable.

1.1.4. Connection to a Hi-Fi system
The audio quality of digital TV and radio programmes
canbeenjoyedevenmorewhenreproducedthrougha
Hi-Fisystem.Todothis,useaRCAcinchstereocable
toconnectthesocketsmarkedAudioL/Ronthereceiver
tooneoftheinputsofyourHi-Fisystemmarkedeither
Line,Aux,SpareorExtra(seepicture9).
Picture7
Picture8
Picture9