Operation Manual

9.4. Copying files from the IDL7000 to a USB device

1.Enterthelibrarybypressing“Library”buttonontheremotecontrol.Ifthis

isaUSB2externalstoragedevicelikeaUSB2memorystick,orUSB2Hard

DiskDrive,alistofavailablestoragedeviceswillbedisplayedlikebelow.

2.Select“InternalStorage”fromtheavailablestoragedeviceslist.Atthis

stageyoucannavigatewithinthefolder,wherethelestobetransferred

arelocated.

3.Selectthe“Archive/Move”functionbypressingthe“menu”keytoswitch

toleselectionmode:

4.Selectthelestobetransferred.Youcanusethe“Markblockbegin”and

“Markblockend”functions(greenremotebutton)and/or“Marksingle”(blue

remotebutton)toselecttheles.