Operation Manual

26
4.2.3.3. Set the active list
Thedigitalreceiverhasminimumthreelists:MainTV,MainRadioandMy
Favourite. In case that user adds some of his favourites, the number will
increase. In all cases user has to set one list, active list that will be used
forzapping.Forthissetting,therearetwokeysontheremotecontrol,“TV/
Radio”key(3)and“Fav”key(18).
Pressingoneofthesetwokeys,anewscreenwillbeopen(seepicture38).In
atable,youcanseethenumberswiththenamesoftheprogrammes.Onthe
rightside,thereisasmallpreviewscreenwithEPGinformationbelowandat
thebottomusercanseeallavailablecommands.
Pressing “TV/Radio” key (3) user will toggle between Main TV and Main
Radiolists,andpressingthe“Fav”key(18)userwilltogglebetweenfavourite
lists.Thenameofthelistwillbedisplayedonthetopoftheprogrammelist
(“MainTVList”onthepicture38).
Use navigation “Up”, “Down”, “Lift”, and “Right” keys for zapping over the
programmes.
Usethe“Blue”key(24)totogglebetween“Programinfo”and“Tech.info”displayedbelowasmallpreviewscreen.The“Green”key(9)
isusedtotogglebetweensortandunsorttheprogrammesinthelist.Inaddition,usercanaddselectedprogrammetothefavouritelist
bypressingfunction“Yellow”key(25)“AddtoFavouritelist”.Theprogrammewillbeaddedinafavouritelistthatissetinquicksave
listsettings(seechapterQuickSaveList).
Afterselectingthelistpress“OK”key(6)“Select”toconrmselectionofactivelist.Thislistwillbeactiveevenafterswitchingofffrom
powersupply.
Note:
Afterfactorydefaultssettingsandfavouritelistedit,activelistisMainTVlist.
Note:
Createdifferentlistsforthemembersofyourfamily.Securetheotherlistswithaparentallock(seechapterParentalLock)against
unauthorisedaccess.Thishelpsyoutopreventtheaccessofchildrentounsuitedprogrammes
4.3. Programme guide (EPG)
TheEPG(ElectronicProgramGuide)givesyouinformationaboutcurrentbroadcastedprogrammesaswellasthescheduleand
informationforfutureprogrammes.
 Tip: The message "No data available" means that the data is not provided by the channel, or the data is not yet received.
Note:
InorderfortheEPGtofunctionproperly,thetimeanddatemustbesetcorrectly.
4.3.1. Program information (Now/Next)
Eachtimeyouswitchchannels(outsideoftheEPGscreen)thereisabriefmessageonthescreen,displayingtheprogrammename,
currenttime,startingandendtime,titleandcontentofthecurrentprogramme.Inaddition,thestartingandendtimes,aswellasthe
titleofthenext(following)programmearedisplayed.
Afewsymbolsareusedtoprovidemoreinformationaboutthetechnicaldetailsofaprogramme:
Streamcontainsmorethanoneaudiotrackorlanguage
BroadcastinDolbyDigital
AdditionalDVBsubtitles
Broadcastinwide-screen
Teletextisprovidedonthisprogramme
Picture38