Operation Manual

19
En•
4.1.6.3.7. Finding and storing the channels
Findingandstoringthechannelsinmanualandautotunemodeissimilar,withtheexceptionofthemainandfavouritelists.Inmanual
mode,onlynewchannelsareaddedtomainTVandradiolistsandnootherchangesaremadetothelists.
4.1.7. Default settings
Thedefaultsettingsfunctionisprovidedtoreturnthereceivertoallthedefault
settingsprogrammedatthefactoryduringproduction.Thismaybenecessary
whena large number of settings have accidentally been made incorrectly,
forexample.Asyoucanseeinapicture24,therearetwokindsofdefault
settings:“Factorydefaults”and“Settingsonly”.
4.1.7.1. Factory Defaults
Pressthe“OK”key(6)andconrmwiththe“Green”functionkey(9)ifyou
wanttochangetheunittothe“Factorydefault”settings.
Note:
Usingthisoptionwilldeletealldatastoredinthepersonalplanner,channel
lists,andfavouritelists.
Duringthisprocess,youwillalsobegiventheoptiontoformattheharddisk.
Itishelpfultodothisoccasionallytomaximizetheperformanceofthehard
disk.  However,all data on the disk will bedeleted. During this step,you
willbeaskedtoenteraPINcode,tohelppreventaccidentaldeletionofthe
contentontheharddisk.ThedefaultPINcodeis“1111.”Ifyoudonotwant
todeletethedataonthedisk,press“Exit.”Afterthis,a“QuickStartGuide”
menuwillbeopen(seepicture25).
IntheQuickStartGuide,youshouldselectthecorrectmenulanguageand
country,tomakesuretheunitwilloperatecorrectlyinyourcurrentlocation.
YoucanalsosettheTimeandDate,orleavetheunitinAutomaticmode,to
collectthecorrectTimeandDateautomatically.Aftermakingthenecessary
changes,pressthe“Exit”key(22)toproceedtothenextstep.Nextstepis
tosettheuserpreferences(seechapterUserpreferencesformoredetail).
Aftermakingthenecessarychanges,pressthe“Exit”key(22)toproceedto
thenextstep,antennasetting(seeAntennaSettings).Afterantennasettingan“Automaticchannelsearch”willstart.Thispartisthe
sameasduringthe“Autotune”option(seechapterFindingandstoringthechannels).
Attheendusercansetaudioandvideooption(seechapterAudio/VideoSettings).
Seealsochapter1.2
4.1.7.2. Settings only
Pressthe“OK”key(6)andconrmwiththe“Green”functionkey(9)toifyouwanttoresettheSettingsonly.Usingthisoption,only
theonuserpreferencesandsettings,suchastimeanddate,willbereset.TheLibraryandallchannellistswillremainthesame.
Note:
Ifthemenuisnotdisplayedclearlyorinblackandwhite,afterchangingthesettings,itisbecausetheVideooutputmodewas
changedwhenyouresettheunittodefaultsettings.TocorrectthisproblemseechapterAudio/VideoSettings.
4.1.8. System information
Thismenudisplaysinformationrelatedtothesoftwareandhardwareversionofthedigitalreceiveraswellastheoptiontoupdatethe
software.Thisinformationmayberequiredifyourequestserviceorrepair.
Picture24
Picture25