Operation Manual

18
4.1.6.2. Finding and storing the channels
Pressthe“Red”functionkey(8),tostartautomatictuning(channelsearch).
Theprogressbarwillshowtheprogressofthescanning.The“Found
channels”screenwillshowalistofthechannelsfound,withthenumberand
typeofthechannel(TVorRadio).Youmaypressthe“Exit”key(22),during
thescanningprocesstostopandusethechannelsthathavealreadybeen
found.
Afterthechannelsearchisnished,orstoppedbytheuser,thesearch
resultswillbedisplayed.Hereusercanseehowmany“Freetoair”and
“Encrypted”,TVandRadioprogrammeshavebeenfound.Inaddition,the
usercanseehowmanyofthemarenew(seepicture22).
Pressthe“Green”functionkey(9),tosavethenewchannelsintothemain
TVandRadiolists.IfyoudonotwanttoupdatethemainTVandradiolists,
pressthe“Red”functionkey(8).Ifyouselected“Replaceservices”,allof
theservicesinthemainandfavouritelistswillbereplaced.
4.1.6.3. Manual tune
In“Manualtune”thereareuptosixoptionsyoucansetbeforestarting
manualtuning(seepicture23).Here,theusercanseethesignalstrength
andsignalqualityfortheselectedtunerwiththeselectedparameters.
4.1.6.3.1. Tuner
Usethisoptiontoselectthetuneronwhichthesearchwillbedone.Press
the“OK”key(6)andselectoneofthetuneroptionswiththenavigationkey
“Up”and“Down”.Attheend,pressthe“OK”key(6)toconrm.
4.1.6.3.2. Channel
Usethisoptiontosetthechannelonwhichthesearchwillbedone.Press
the“OK”key(6)andusethenumerickeysonyourremotecontroltoenter
thenumberofthechannelfrom5to12andfrom21to69.Attheend,press
the“OK”key(6)toconrm.Whenyouchangethechannel,thefrequency
valuewillbeautomaticallyadjustedtothecorrectfrequency.
4.1.6.3.3. Frequency
Usethisoptiontomanuallysetthefrequencyonwhichthesearchwillbe
done.Press“OK”key(6)andusethenumerickeysonyourremotecontrol
toenterafrequencyfrom174000kHzto230000kHzorfrom470000kHzto
862000kHz.Attheend,press“OK”key(6)toconrm.
4.1.6.3.4. Auto Mode
Thismodewillauto-detecttheFFTmodeandGuardIntervalparametersPressthe“OK”key(6)andselectoneoftheoptionswith
thenavigationkey“Up”and“Down”.Attheend,pressthe“OK”key(6)toconrmselection.Iftheoption“Yes”isselected,options
“FFTMode”and“GuardInterval”willbedisabled.
4.1.6.3.5. FFT Mode
Thisoptionisavailableonlyif“AutoMode”issetto“No”.UsethisoptiontosetFFTmode.Pressthe“OK”key(6)andselectoneof
theoptionswiththenavigationkeys“Up”and“Down”.Attheend,pressthe“OK”key(6)toconrmselection.
4.1.6.3.6. Guard Interval
Thisoptionisavailableonlyif“AutoMode”issetto“No”.Usethisoptiontosettheguardinterval.Pressthe“OK”key(6)andselect
oneoftheoptionswiththenavigationkeys“Up”and“Down”.Attheend,pressthe“OK”key(6)toconrmselection.
Picture21
Picture22
Picture23