Operation Manual

8
Step2:
A new menu is displayed: User Preferences – step 2/3
In general, you do not need to modify the settings in this display.
If you want to set up specifi c settings, then modify the lines according to your
preferred settings, using the remote control.
Once your selections are OK, press Exit on the remote control.
Step3:
You have fi nished the initial confi guration. Now the product will automatically
start the channel search. This may take several minutes.
When the Channel Search is complete, the list of channels found will be
displayed.
Press Save and Exit (green button on the remote control).
CONGRATULATIONS: you have confi gured your product. You may start watching and recording programs.
Note:
The behaviour of the receiver after switching on or power up depends on the “Power-up Mode” settings (see the chapter Power Up
Mode)
Note:
In order to set the correct video output type of your digital receiver press “Menu“ + “Settings“ + “Audio/Video Settings“ (see the chapter
Audio/Video settings)