Operation Manual

7. When the destination folder is highlighted, use the “Select” function by

pressing the red button on the remote control. The ﬁ le transfer will start and

the window indicating transfer progress is displayed.

If there is insufﬁ cient disk space, an error message is displayed and the

transfer is aborted.

10. Specifications

General Information:

• 2 Common Interface (CI) slots

• 1 Conditional Access (CA) Smart Card Slot, CONAX

• Max 6000 Channels (TV and Radio)

• Up to 10 Favourite Lists of 100 channels each

• Multilingual Graphical User Interface (GUI) with colour themes

• Extended Electronic Program Guide (EPG) up to 7 days

• Picture In Picture (PIP)

Inputs*:

• 2 Tuners, for dual recording (simultaneously)

• RF input Connectors: 2 Type IEC169-2

• Loop Through Output Connector: 2 Type IEC169-2

• Input Frequency range: 47~862 MHz

• RF Input Impedance: 75Ohm unbalanced

• Input signal level: -15 dBm~+15dBm (typical for 64-QAM)

• Demodulation type: QAM16 QAM, 32 QAM, 64 QAM, 128 QAM. 256 QAM

• Outer code RS (204)

• TV standard: PAL (G/I/K), SECAM-K RF Modulator

System information:

• CPU + MPEG2 decoder / Clock: Sti5514 / 166MHz 32-bit RISC

• Transport: 2 DVB De-multiplexer

• Flash memory: 4 MB

• System memory: 16MB

• EEPROM: 8KB

* Important: RF modulator is an option. Your product does not have the RF modulator.