Operation Manual

24
Pressing “TV/Radio” key (3) user will toggle between Main TV and Main Radio
lists, and pressing the “Fav” key (18) user will toggle between favourite lists.
The name of the list will be displayed on the top of the program list (“Main TV
List” on the picture 38).
Use navigation “Up”, “Down”, “Lift”, and “Right” keys for zapping over the
programmes.
Use the “Blue” key (24) to toggle between “Program info” and “Tech. info”
displayed below a small preview screen. The “Green” key (9) is used to toggle
between sorted and unsorted for the programmes in the list. In addition, user
can add selected program to the favourite list by pressing function “Yellow”
key (25) “Add to Favourite list”. The program will be added in a favourite list
that is set in quick save list settings (see chapter Quick Save List).
After selecting the list press “OK” key (6) “Select” to confi rm selection of active list. This list will be active even after switching off from
power supply.
Note:
After factory defaults settings and favourite list edit, active list is Main TV list.
Note:
Create different lists for the members of your family. Secure the other lists with a parental lock (see chapter Parental Lock) against
unauthorised access. This helps you to prevent the access of children to unsuited programmes
4.3. Program guide (EPG)
The EPG (Electronic Program Guide) gives you information about current broadcasted programmes as well as the schedule and
information for future programmes.
Tip: The message "No data available" means that the data is not provided by the channel, or the data is not yet received.
Note:
In order for the EPG to function properly, the time and date must be set correctly.
Program information (Now/Next)
Each time you switch channels (outside of the EPG screen) there is a brief message on the screen, displaying the program name,
current time, starting and end time, title and content of the current program. In addition, the starting and end times, as well as the title
of the next (following) program are displayed.
A few symbols are used to provide more information about the technical details of a program:
Stream contains more than one audio track or language
Broadcast in Dolby Digital
Additional DVB subtitles
Broadcast in wide-screen
Teletext is provided on this program
Note:
Dolby Digital does not mean that the channel is actually broadcasting a program in 5.1 Surround sound. The channels normally
broadcast in Dolby Digital, but most of the time, you will only receive Stereo Sound. Usually, only some special events and movies are
broadcast 5.1. The digital receiver cannot determine the version of Dolby Digital used in the broadcast, such as 2.0 or 5.1.
You can specify how long this (and any other) information should be displayed on screen (go to “Settings”, and then select the entry
“User Preferences”, followed by “Pop-up Timeout”).
By pressing the “Information” key (21), while watching a program, the information appears with additional details about the program. If
EPG data is available, it is possible to scroll the time with the “Left” and “Right” navigation keys. The additionally program information
can be displayed by pressing the "Blue" function key (24) (extended event information). You can select “Add to favourite list” using the
“Yellow” function key (25), to add current the program to the favourite list. The “Quick Save List” option in “User preferences” menu
Picture 38