Operation Manual

17
En
4.1.5. Channel Search
This is a place where you can do auto or manual tuning, auto and manual
channel search (see picture 19).
4.1.5.1. Auto tune
In “Auto tune” there are only two options for the user to set before staring auto
tuning (see picture 20):
1 – Search mode. Here it is necessary to select between “Add new services”
and “Replace services”. If you select “Add new services”, the receiver will,
after searching for channels, add only new TV and radio programs into the
Main TV and main Radio lists. If you select “Replace services”, the receive
will, after searching for channels, completely replace the Main TV and Main
Radio lists. In this case, the previous channel lists will be deleted. Press
the “OK” key (6) and select one of the tuning options with the navigation key
“Up” and “Down”. At the end, press the “OK” key (6) to confi rm selection.
2 – Tuner. Here, the user can select on which tuner the channel search will
be done. If only one antenna with the loop through is connected, the user
can select either Tuner1 or Tuner2. If the digital receiver is connected to
two different antennas, the user can use the option Tuner1&2 to be able to
scan services on both antennas. Press the “OK” key (6) and select one of
the tuners with the navigation key “Up” and “Down”. At the end, press the
“OK” key (6) to confi rm selection.
By choosing Auto Tune, the PVR starts immediately to search for channels.
4.1.5.2. Finding and storing the channels
The progress bar will now show the progress of the scanning. The “Found
channels” screen will show a list of the channels found, with the number and
type of the channel (TV or Radio). You may press the “Exit” key (22), during
the scanning process to stop and use the channels that have already been
found.
After the channel search is fi nished, or stopped by the user, the search results
will be displayed. Here user can see how many “Free to air” and “Encrypted”,
TV and Radio programmes have been found. In addition, the user can see
how many of them are new (see picture 22).
Press the “Green” function key (9), to save the new channels into the main
TV and Radio lists. If you do not want to update the main TV and radio lists,
press the “Red” function key (8). If you selected “Replace services”, all of the
services in the main and favourite lists will be replaced.
Picture 19
Picture 20
Picture 21
Picture 22