Operation Manual

To set instant replay time press “OK” key (6) and select one of the options with navigation key “Up” and “Down”. At the end, press “OK”

key (6) to conﬁ rm selection

Note: This option can slow down channel switching time.

4.1.3.4. Start Guard Time

This is a time period the receiver uses to start recording before programmed time, in case a program starts earlier than scheduled. You

can choose between 1, 2, 3, 5, 10, 15, 30 and 60 minutes. Press “OK” key (6) and select one of the options with navigation key “Up”

and “Down”. At the end, press “OK” key (6) to conﬁ rm selection.

4.1.3.5. End Guard Time

This is a time period the receiver uses to continue recording after the programmed end time, in case a program starts later than

scheduled. You can choose between 1, 2, 3, 5, 10, 15, 30 and 60 minutes. Press “OK” key (6) and select one of the options with

navigation key “Up” and “Down”. At the end, press “OK” key (6) to conﬁ rm selection.

4.1.3.6. Record Subtitle

If this option is activated, all available subtitles will be recorded. This applies only to DVB subtitles, not teletext subtitles. Press “OK” key

(6) and select one of the options with navigation key “Up” and “Down”. At the end, press “OK” key (6) to conﬁ rm selection.

Note: If this option is enabled, the recording is done in the transport stream format

4.1.3.7. Record Audio tracks

If this option is activated, all available audio tracks will be recorded, included

AC3 and foreign languages. Press “OK” key (6) and select one of the options

with navigation key “Up” and “Down”. At the end, press “OK” key (6) to conﬁ rm

selection.

4.1.4. Time / Date

This is a place where you can set the time and the date as well as some basic

parameters related to the time (see picture 17).

4.1.4.1. Automatic Time Update

If the “Automatic Time Update” is set to “On”, the receiver will receive the time

and date as broadcasted. Press “OK” key (6) and select one of the options

with navigation key “Up” and “Down”. At the end, press “OK” key (6) to conﬁ rm

selection.

Note:

Some cable networks may transmit an incorrect time stamp.

4.1.4.2. Date

This option is able only if “Automatic Time Update” is set to “Off” and it is used to set current date. After pressing “OK”, use the

directional keys “Left” and “Right” to select the day, month or year. To set desired value use the directional keys “Up” and “Down”.

Conﬁ rm your entries with the “OK” key (6).

4.1.4.3. Local Time

This option is able only if “Automatic Time Update” is set to “Off” and it is used to set current local time. After pressing “OK”, use the

directional keys “Left” and “Right” to select the hours, minutes or seconds. To set desired value use the directional keys “Up” and

“Down”. Conﬁ rm your entries with the “OK” key (6).

4.1.4.4. Time Zone

The DVB standard broadcast time and date in the GMT time zone. In order to display local time correctly, it may be necessary to set a

time zone, indicating the difference between local time and GMT (e.g. in Finland local time is GMT +2). Press “OK” key (6) and select

one of the time zones with navigation key “Up” and “Down”. At the end, press “OK” key (6) to conﬁ rm selection.

Picture 17