Operation Manual

12
Main Menu:
Besides the program that is received from the TV station, your digital receiver
is able to display different information on your TV screen like: Volume bar,
Menu, Pop-ups… All those things are used as an interface between receiver
and the user. This interface is known as GUI (Graphical User Interface) or OSD
(On Screen Display). The actual GUI display generated by your receiver may
differ slightly from those shown on the picture 11, as continuous updates of
the software may alter the appearance or even the structure of the menus.
Navigation within the GUI display is effected by means of the four directional
keys and “OK” key, which is used to confi rm a selection, as well as in some
cases by means of the coloured function keys.
To enter into main menu, press “Menu” key (4) on your remote control. Being
in a menu and pressing “Menu” key (4) you will completely exit from all the open menu pages. Using “Exit” key (22) you will exit only
from the last open menu page.
You can see the structure of the menu pages in picture 12. The numbers in the brackets show numbers of the chapter in this manual.
Picture 12
Note:
1 – For units without Conax CA, there is the “Common Interface” option.
2 – Only for Conax CA version.
4.1. Settings
To access “Settings” press “Menu” (4) and then select “Settings.” You may
select the type of settings using the navigation keys or the corresponding
number keys. In this chapter, all options of the settings menu will be
described.
4. Graphical User Interface
Picture 11
Picture 13