Operation Manual

9
En
Changing the program on your receiver (Program selection)
• You can use the numeric keys (20) on your remote control.
• You can use the directional keys (7) “Up” and “Down” on your remote control or on the front panel of the receiver.
• You can use the Ch+ and Ch- keys (13) on your remote control
• Scroll through the program list by pressing the “TV” key (3), select with the navigation key “Up” or ”Down” the program list, and
confi rm the selection with “OK” key (6).
Changing volume level
Use the Volume +/- keys on the remote control. Optionally, you can also use the directional keys “Left” and “Right” on your remote
control or on the front panel of the receiver, while watching a TV program.
Recording TV/Radio programmes:
From the Current Program:
To record a broadcast program, you can press the red “REC” (28) key. From this instant, the program is recording onto the built-in hard
disk. You can stop the recordings with the “STOP” key (27). A message appears if the recording ends. If more than one recording is
running you can stop one by selecting it using the “Up” or “Down” keys (7) and pressing “OK“ (6) to confi rm it. For this function, you
can use keys on your remote control or on the front panel of the receiver.
From the EPG:
Press the “GUIDE” key (19), the EPG (Electronic Program Guide) appears. Here you can fi nd a list of the actual programmes to be
broadcast, if the channel information is available. The availability of the EPG information also depends on how far into the future the
broadcaster supplies the data.
Select the desired program with the navigation keys “Right”, “Left”, “Up” and “Down” (7). The selected program is highlighted. By
pressing the “REC” key (28), you can add the selected program into your Personal Planner for further processing, such as scheduling
an automatic recording.
Time shift:
If you are interrupted while watching a TV program, just press the “Pause/Play” key (26). From this moment, your program will be
recorded on the built-in hard disk. On the screen, you will see a frozen picture, like the one you have when you press pause on a VCR,
as well as the time-shift counter. By pressing the “Pause/Play” key (26) again, the program will start again, continuing from where you
have stopped.
Note:
During recordings, a red dot with the program name is displayed on the upper part of the TV screen. The maximum number of
simultaneous recordings is two, plus one time shift. This information can be removed from the screen by pressing the “Blue” function
key (24).
Viewing recorded programmes
Press the “Library” key (5), a list of the recorded programmes appears. Select with the directional keys “Up” and “Down” the desired
program and press “OK” (6) or “Pause/Play” key (26). Use the “Exit” key (22) to exit the library.
2. Basic Operation: