Specifications

SETTINGS EXPLANATION

Speed (GREEN LED)

This determines the maximum feed rate of the loader. Too low of a setting may cause inconsistent

feeding at high rates of fire. Too high of a setting may cause double feeding. 1 blink is slowest

speed and 3 blinks is the fastest.

1 blink = Low (best for markers with mechanical triggers or low rates of fire, less than 10bps)

2 blinks = Medium (Good for most markers)

3 blinks = High (Best for high speed electronic markers with anti-chop breech sensors)

Sound Sensitivity (RED LED)

This determines how sensitive the microphone will be to register a shot. Too low of a setting may

cause inconsistent feeding due to not sensing each shot. Too high of a setting may decrease

battery life by activating when not shooting. A setting of 1 blink is the least sensitive and 3 blinks is

the most sensitive.

1 blink = Low (best for louder mechanical markers such as the Empire BT-4 Combat Line)

2 blinks = Medium (good for most markers)

3 blinks = High (Should be used with very quiet electronic markers such as the Empire BT TM15)