User Manual

The Tune Up kit includes accessories for the Magna Drive Loader system. Which include 5 dierent magnet plates, extra magnets, and 2 feed cone springs. Magnet Plates 1) Remove the Drive cone assembly completely. 2) There is a metal plate that ts into the bottom of the spring carrier. By changing this metal plate for dierent congurations you can change the amount of holding force, and the force pulse duration when the clutch clips. The metal in the center of the magnet plate will supply a constant force to the drive cone. The shaped protrusions on the outside of the magnet plate will supply an intermittent force to the Drive cone when the clutch slips. Too little metal on the inside of the plate may allow the clutch to slip too easily and thus prevent feeding of paintballs. If you are using paint-less practice balls (rubber) you may want the star shaped metal plate with all the shaped protrusions, and more magnets, as the practice balls have signicantly more friction than regular paintballs. 3) After you have setup your magnet plate read the Drive Cone installation section for the correct assembly procedure.
The Tune Up kit includes accessories for the Magna Drive Loader system. Which include 5 dierent magnet plates, extra magnets, and 2 feed cone springs. Magnet Plates 1) Remove the Drive cone assembly completely. 2) There is a metal plate that ts into the bottom of the spring carrier. By changing this metal plate for dierent congurations you can change the amount of holding force, and the force pulse duration when the clutch clips. The metal in the center of the magnet plate will supply a constant force to the drive cone. The shaped protrusions on the outside of the magnet plate will supply an intermittent force to the Drive cone when the clutch slips. Too little metal on the inside of the plate may allow the clutch to slip too easily and thus prevent feeding of paintballs. If you are using paint-less practice balls (rubber) you may want the star shaped metal plate with all the shaped protrusions, and more magnets, as the practice balls have signicantly more friction than regular paintballs. 3) After you have setup your magnet plate read the Drive Cone installation section for the correct assembly procedure.