User Manual

English • 55
TROUBLESHOOTING TABLE
Problem/error Cause What to do?
The machine
willnotstart.
• The main switch is not
switched on.
• Check whether the main switch is on.
• There is no voltage in the
power outlet.
• Check the fuse.
• Check if the power cord plug is
correctly inserted into the power
outlet.
There is voltage
inthe outlet,
butthedrum does
not spin and the
appliance does
notwork.
• Open the door. • Check if the door is closed properly.
• The condensate tank
isfull.
• Empty the condensate tank
(see chapter »CLEANING AND
MAINTENANCE/Emptying the
condensate tank«).
• Perhaps the START
DELAY function was set.
• Programme was not
started in accordance
with the instructions.
• To cancel the start delay, press
STARTDELAY [startuitstel]
and hold for 3seconds.
• Re-read the instructions for use.
The appliance
stops heating
completely during
aprogramme.
• The dryer filter may be
clogged. As a result, the
temperature in the dryer
rises, which in turn causes
overheating, and therefore
heating is switched off.
• Clean the dryer filter (see CLEANING
AND MAINTENANCE/Cleaning
thedryer filter).
• Wait for the appliance to cool down,
andtry running it again. If the dryer still
fails to start, call a service technician.
A slight hitting noise
appears.
• If the dryer is out of use
for a long period of time,
the support elements are
under stress at the same
point.
• The noise will subside without any
intervention.
The door opens
during drying.
• Excessive load on the
door (too much laundry
inthe drum).
• Reduce the amount of laundry.
Unevenly dried
laundry.
• Laundry of varying
types and thickness, or
excessive amount of
laundry.
• Make sure you have sorted the laundry
bytype and thickness, and check that
you have added a suitable amount
of laundry to the drum, and that you
have selected a suitable programme
(seePROGRAMMETABLE).