User Manual

English • 45

ADJUSTING THE SETTINGS

Most programmes feature basic settings, but these settings can be changed.

Adjust the settings by pressing the relevant function button (before pressing the Start/Pause button).

Functions that cannot be changed with the selected programme are partly lit (dimmed).

Certainsettings cannot be selected with some programmes. Such settings will not be lit,

andthebutton will ﬂash whenpressed.

Description of lighting of functions for the selected programme:

• Lit (Basic/pre-set setting)

• Dimmed (Functions that can be adjusted)

• Unlit (Functions that cannot be selected)

DRYING MODE

EXTRA DRY [extra droog]

Press EXTRA DRY to adjust the dryness level–

thedryer the laundry, the longer the drying

cycle. Thissetting can be adjusted before the

start of the drying process. After the drying

programme, thissetting is not stored.

LOWER TEMPERATURE [lageretemperatuur]

For delicate laundry. Lower temperature depends on the programme for which the function was

selected. This setting can be adjusted before the start of the drying process. After the drying

programme, this setting is not stored.

ANTI CREASE [anti-kreuk]

If you do not intend or cannot remove the laundry from the dryer immediately after the

completion of the drying programme, we recommend using the ANTI CREASE function

whichhas to be selected before the start of the drying process.

Press on ANTI CREASE [anti-kreuk] to choose between 1h, 2h, and 3h or to deactivate this

function. When you open the dryer door after the completion of the drying programme,

thefunction is automatically deactivated.