Operation Manual

English • 43
If you would like to change a program while a washing cycle is already running.
• Press during 3 seconds on the activated program button (2). Select another program and switch the dishwasher on again.
Attention: only do this when the program is running for a short time.
TIP: forgot to add a dish?
1. Carefully open the door a little.
2. Wait until the spray arms stop turning and than open the door completely.
3. Place the forgotten dishes in the dishwasher.
4. Close the door.
5. The program will resume after 10 seconds.
setting the dishwasher
5
SWITCHING THE DISHWASHER ON AND OFF
CHANGING OR PAUSING A PROGRAM
• Switch the dishwasher on by pressing the On/off button (1).
• Select the desired program by pressing the corresponding program button (2). The indicator light of the selected program will
blink.
• Close the door to start the program.
When the machine has finished a buzzer will sound for 8 seconds.
• Open the door slightly and switch the dishwasher off with the On/off button (1).
NOTE! You can slightly open the door and wait a few minutes before unloading the dishwasher. The dishes and
cutlery will still be very hot and may break as a result of the heat. Moreover, the dishes dry better when allowed
to stand for a few minutes.
1 2