Operation Manual

THE FITTING OF THE APPLIANCE
• Check that the cabinet and the space for the microwave oven meet the dimension and
ventilation requirements.
• Slide the microwave oven into the cabinet. Make sure the housing of the microwave oven
does not come in contact with the walls of the kitchen cabinet. Make sure there is at least 2
mm between the casing and the walls of the kitchen cabinet. Make sure the microwave oven
is centered between the walls of the kitchen cabinet. Note: Make sure the cable is not stuck
and does not lie on top of the appliance.
• Open the microwave oven door.
• Use the provided screws to fasten the appliance to the cabinet.
• Close the microwave oven door and plug the appliance in.
• The microwave oven is now ready for use.
ELECTRICAL CONNECTION
Check that the voltage in your home corresponds with the voltage printed on the appliance.
These groups in the meter must be secured with at least 16 amps each. The connection cable must have a cross-section of at least
2.5mm² and must have a length of at least 1.5 m. When the cable is too short, you have no room to already connect the microwave
oven and place it against the wall before plugging it in.
30 • English