Operation Manual
Before you use the appliance for the rst time, please do 
as follows: Carefully unpack the appliance and remove 
all the packaging material. Keep the material (plastic 
bags and cardboard) out of reach of children. Check the 
appliance after unpacking for any damage, possible from 
transportation. 
Before plugging into a socket, check whether the voltage 
in your home corresponds with the voltage printed at the 
bottom of the appliance. Place the appliance on a stable 
and heat resistant surface.
Clean the outside of the appliance with only a damp cloth
and dry it with a dry cloth. Clean the parts: 
the multi-pad holder 12, the crema maker 13, the drawer 
10, the coffee outlet 9, the grid 7 and the drip tray 8 
with warm water and some washing-up liquid or in the 
dishwasher and 
make sure that 
the parts are dry 
before next use. 
See chapter: 
CLEANING & 
MAINTENANCE. 
Connect the 
appliance to an 
earthed socket. 
• Remove the removable water reservoir 1 by pulling it 
  backward at a 45 degree angle 
  from the coffee pad machine.
• Fill the water reservoir with cold 
  water to the maximum level and 
  place it in the coffee pad 
  machine. Make sure the reservoir 
  is placed correctly.
• Open the drawer 10 for the 
  coffee padholder by gently 
  pulling the drawer out of the
  coffee pad machine. The drawer 
  will now slide open.
• Place a coffeepad in the multi 
  padholder 12 with the round side 
  downwards and press it lightly. 
  Please make sure that the coffee 
  is evenly devided.
• Close the drawer 10 gently 
  inwards until it can’t move any.
• Put a large mug or bowl under the 
  coffee outlet 9 to collect the water.
• Connect the appliance to an 
  earthed socket.
2 | BEFORE FIRST USE 
• Switch the coffee pad machine on 
  with the on/off button 3 and 
  press 
directly the 1-cup   
  - button and 2-cups 
- button 
  at the same time. To rinse the 
  appliance, 
don’t let it heat up.
• The coffee pad machine will now 
  ll the boiler and rinse 
  the appliance.
• The coffee pad machine will switch off automatically as 
  soon as the rinsing is done.
• The coffee pad machine is now ready for use.
With the taste selector 5 you can select and adjust your 
individual water amount/ coffee strenght. You can slide 
the taste selector upwards and downwards.
• When you slide the taste selector 
  downwards, you will get stronger 
  coffee with a smaller amount of 
  water.
• Place the taste selector in the 
  middle and you will get a 
  standard amount of coffee.
• When you slide the taste selector 
  completely upwards, the coffee 
  will get thinner because the 
  appliance will use more 
  water. We advise to place a small mug when you use this 
  selection.
• Fill the removable water reservoir 
1 with cold water 
  to the 
maximum level and place it in the 
  coffee pad machine. Make sure the reservoir is placed 
  correctly.
• Switch the coffee pad machine on with the on/off 
  button 
3 and the appliance will now heat up the water. 
  The red light will blink slowly while heating. This will 
  take 2 minutes.
• Open the drawer 10 for the coffee padholder by gently 
  pulling the drawer out of the coffee pad machine. The 
  drawer will now slide open.
• Place a coffeepad in the multi-pad holder 13 with the 
  round side downwards and press it lightly. 
  Make sure that the coffee is well spread and loose.
  Depending on the number of cups of coffee you want to 
  make, you can place one or two coffeepads in the 
  multi padholder. This coffee pad machine can be used 
  with almost all available coffeepads. You can place one 
  or two coffeepads and coffeepads of different sizes in 
  the multi padholder 12. The coffee pad machine will 
  automatically adapt to the number of coffeepads you 
  have placed (max. 2 coffeepads). 
  Warning: do not use the holders for grounded coffee.
• Slide the drawer 10 gently inwards until it can’t move 
  any further. The green light 6 will light up indicating 
  that the drawer 
10 is locked correctly. The appliance 
  can not make coffee when the green light is not lit.
• Place one or two cups under the coffee-outlet 9.
• Adjust the taste-selector for the amount of water which 
suits your own taste the best.
22
3 | RINSING THE MACHINE
4 | TASTE SELECTOR
5 |MAKING COFFEE
WARNING! Before you make the very rst cup of 
coffee, you must rinse the appliance with water. 
Follow the steps in chapter 3 carefully to make sure 
the boiler is lled with water correctly.
10
9
8
7
12
13










