Installation Instructions

11598Ecolution Solo CV / Combi 50 L
44 Nederlands
14.
Plaatsing terugslagklep HR
Noodzaak en positie van externe terugslagklep in installatie
Om circulatie van warmte opgewekt in de Ecolution
®
over de HR-ketel te voorkomen, is het soms noodzakelijk om
een terugslagklep te plaatsen. De noodzaak en positie zijn afhankelijk van het merk en type HR-combi toestel. Het
is belangrijk om te weten of de driewegklep in de ketel in aanvoer of retour gemonteerd is en in welke positie de
driewegklep stand-by staat (indien geen warmtevraag - in stand cv of warmwater).
In deze situatie dient de terugslagklep in de aanvoer te worden gemonteerd met de stromingsrichting
naar de installatie.
Deze situatie is van toepassing op o.a. de volgende toestellen:
Intergas Kombi Kompact HRE 24/18
Intergas Kombi Kompact HRE
Intergas Kombi Kompact HRE 24/18
Intergas Kombi Kompact HR 22
Intergas Kombi kompact HR 28/24
Intergas Kombi Kompact HR 28
Intergas Kombi Kompact HR
14.1.
Situatie 1 – Toestellen zonder driewegklep
In deze situatie is geen terugslagklep noodzakelijk.
Deze situatie is van toepassing op o.a. de volgende toestellen:
Merk Type
Nefit Proline HRC 24 CW 3
Nefit Proline HRC 24 CW 3
Bosch Compact 3
Bosch Compact 4
AWB Thermo Elegance 3
AWB Thermo Elegance 4
AWB Thermo Elegance 6 (losse boiler)
AWB Thermomaster 3HR 24 T combi
AWB Thermomaster 3HR 28 T combi
Daalderop Combipact HR 24/33
Merk Type
Itho Kli-max2 HR 24 CW4
Itho Kli-max2 HR 30 CW5
Itho Kli-max2 HR 36 CW5+
Itho Kli-max2 HR 42 CW6
Remaha Avanta CW3 c
Remeha Avanta CW4 c
Remeha Avanta CW5 c
Remeha Avanta CW6 c
Remeha Calenta 28 c
Remaha Calenta 28 c
Remeha Calenta 25L CW6
14.2.
Situatie 2 – Toestellen met 3-wegklep in de retour en klep standby in de stand warmwater