User's Manual

33
Connect the power adapter to the input and to the relative power cord,
which should be plugged into an a.c. mains socket supplying the voltage
indicated on the adapter label.
All connections must be made with the instrument switched off, or
at least before plugging in the power cord and the USB cable.
Use only the power adapter supplied by Inventis s.r.l.
Connect the device only to medical equipment or to devices
equipped with an isolating transformer.
Connect the device to an electrical power line carrying a voltage
between 100 V and 240 V, with frequency between 50 Hz and 60
Hz.
3.1.2 Front Panel
A socket located at the bottom right hand corner of the Trumpet (the only
connector on the front panel) is used to plug in the wired probes used for
REM measurements.