Users Manual

ISM14585-EVB User’s Manual
DOC-DS-14585-EVB-201911-3.6
Confidential Inventek Systems
Page 7
3.4 Key Benefits
• Lowest power consumption
• Smallest system size
• Lowest system cost
3.5 Limitations
Inventek Systems products are not authorized for use in safety-critical applications
(such as life support) where a failure of the Inventek Systems product would
reasonably be expected to cause severe personal injury or death.
3.6 Regulatory Compliance
CE
Regulator
Status
FCC
O7P-14585
IC
10147A-14585
RoHS
Compliant
There is no requirement for minimum separation distance for the Inventek ISM14585-L35-
P8 module. The ISM14585-L35-P8 module meets the SAR test exclusions per KDB 447498
D01 V06 section 4.3 as well as RSS-102, section 2.5.1 Exemptions limits for Routine SAR
Evaluation. The ISM14585-L35-P8 module can be installed as both a mobile or portable
configuration
Inventek Systems FCC, IC, and CE module transmitter certifications for the ISM14585-L35-
P8 module can be used to the advantage of any manufacturer developing a product using
these devices. In order to take full advantage of the certifications and remain in compliance,
Developers may not interfere, modify, replace and/or enhance the SiP antenna design,
layout and power settings. For FCC compliance, End Customer finished products will still
need to meet the Declaration of Conformity (SDoC) requirements according to 47 CFR
Chapter 1, part 15, subpart B.
The testing required for the Declaration of Conformity (SDoC) requirements is specified in
sections 15.107 and 15.109. The official documents can be obtained from the U.S
Government Printing Office online. U.S. Government Printing Office CFR 47.
Any changes to the Inventek certified antenna options such as a different antenna or
adding an antenna diversity switch will require filing for a Class 2 permissive change. Any