Users Manual
ISM14585-EVB User’s Manual
DOC-DS-14585-EVB-201911-3.6
Confidential Inventek Systems
Page 22
10 REVISION CONTROL
Document: ISM14585-EVB
ISM14585 Evaluation Board
External Release
DOC-DS-14585-201911-3.6
Date
Author
Revision
Comment
5/05/2018
AS
1.0
Preliminary
7/04/2019
AS
2.0
Schematics Update
9/17/2019
AS
2.5
Antenna Keep Out and Trace
Layout Updated
10/4/19
AS
3.0
w.fl external antenna required
layout
11/1/19
AS
3.1
Updated Internal Antenna RF
Trace layout
11/19/19
AS
3.5
Added Cert IDs & updated
Dialog SDK Tool Chain
Instructions
7/9/20
AS
3.6
AU SPI I/F Note in Section 2
and Section 1.1 for additional
details on Ordering
Information
11 CONTACT INFORMATION:
Inventek Systems
2 Republic Road
Billerica Ma, 01862
Tel: 978-667-1962
Sales@inventeksys.com
www.inventeksys.com
Copyright 2017, Inventek Systems. All Rights Reserved. This software, associated documentation and materials ("Software"), referenced
and provided with this documentation is owned by Inventek Systems and is protected by and subject to worldwide patent protection
(United States and foreign), United States copyright laws and international treaty provisions. Therefore, you may use this Software only as
provided in the license agreement accompanying the software package from which you obtained this Software
("EULA"). If no EULA applies, Inventek Systems hereby grants you a personal, non-exclusive, non-transferable license to copy, modify,
and compile the Software source code solely for use in connection with Inventek's integrated circuit products.
Any reproduction, modification, translation, compilation, or representation of this Software except as specified above is prohibited without
the express written permission of Inventek. Disclaimer: THIS SOFTWARE IS PROVIDED AS-IS, WITH NO WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, NONINFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
Inventek reserves the right to make changes to the Software without notice. Inventek does not assume any liability arising out of the
application or use of the Software or any product or circuit described in the Software. Inventek does not authorize its products for use in
any products where a malfunction or failure of the Inventek product may reasonably be expected to result in significant property damage,
injury, or death ("High Risk Product"). By including Inventek's product in a High Risk product, the manufacturer of such system or
application assumes all risk of such use and in doing so agrees to indemnify Inventek against all liability. Inventek Systems reserves the
right to make changes without further notice to any products or data herein to improve reliability, function, or design. The information
contained within is believed to be accurate and reliable. However, Inventek does not assume any liability arising out of the application or
use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its
patent rights nor the rights of others.