User's Manual

3. Carefully connect the modules to the VESA plate.
4. Slide the quick release latch on the rear of the VESA plate to the locked position to secure the VESA plate
to the module above it.
NOTE: HP highly recommends that you secure the Elite Slice assembly by attaching a security cable to
the rear of the VESA plate. This stops the quick release latch from being moved to the unlocked position
and prevents accidental release of the modules.
The security cable is designed to act as a deterrent, but it may not prevent the computer from being
mishandled or stolen.
Installing a security cable
The 10 mm ultra-slim cable lock displayed below can be used to secure the computer. When installed in the
bottom module, the cable locks all modules together. If the VESA plate is installed, slide the quick release to
the locked position and install a security cable to lock all modules together.
NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being
mishandled or stolen.
Installing a security cable 13