User's Manual
62
Beaming an Item
1. Refer to the previous section, set up the device to receive beams.
2. In Calendar, Contacts, Notes, Task, or Pictures, select an item that you want to
beam. (In Calendar, for example, rst open the appointment in Agenda view.)
3. Tap Menu > Beam.
4. Align the infrared ports at close range (no more than 1 meter apart). Wait until the
device name appears on the list, scroll to it, and then tap it.
5. Tap Yes at the conrmation prompt.
Receiving a File
1. Refer to the previous section, set up the device to receive beams.
2. Align the infrared port on the top of the device with the infrared port on your PC or
other infrared-enabled device. Make sure they are unobstructed and within close
range.
3. After your PC detects a new infrared connection, select a le to send to your device
and click the Send button.
4. Tap Yes at the prompt to conrm receiving the le.
5. After the transmission process is nished, the le should appear on the device
under My Documents in the File Explorer.
6.5 USB Connections
A USB connection is a wired connection that lets you connect the device to your
computer for synchronizing data. With a USB connection, you can connect your PC
to the Internet by using the device’s networking capability and copy or move les
between your PC and your device.
You have to install ActiveSync or WMDC (see chapter three for more information) on
your PC in order to use a USB connection.