User's Manual

77
Beaming an Item
Once you create a partnership, the two partnered Bluetooth-enabled devices don't
need to be discoverable to communicate. In Calendar, Contacts, Notes, Tasks and
Pictures, you can beam les and information to other devices using Bluetooth.
1. Turn on Bluetooth. Select Start > Settings > Connections tab > Bluetooth >
Mode tab. Select the Turn on Bluetooth checkbox.
2. Select an item you want to beam. For example, open a task in Tasks.
3. Select Menu > Beam.
4. Select the destination device.
5. Select OK after the transfer is done.
NOTE: If the target device does not appear in the list, ensure that the device is powered on,
discoverable and within close range of the device. Also, ensure that Bluetooth has been enabled
on the device.
Bluetooth is turned off by default. However, if you turn Bluetooth on, the device will remember
this setting and turn it back on automatically whenever the device powers up. To save battery
power, please remember to turn Bluetooth off after beaming information.