User Manual

Manual
Mercury
版 本 : 01
日 期 : 95/12/12
18
INVENTEC CORPORATION
英業達股份有限公司
2.1 Getting Started
2.1.1 Power on/off the device
Press the POWER button to turn on the device. The POWER button is located on the
right side of the device. When you power on the device for the first time, you are
asked to calibrate the device. Please refer to the “Device calibration” section in this
chapter for calibration steps. Press the POWER button again to switch the device to
sleep mode. You can still receive phone calls and messages when the device is
operating on sleep mode.
2.1.2 Device calibration
Calibrating the device ensures the tapped item is activated. To calibrate your device,
tap the center of the cross with the stylus as the cross moves around the screen. If you
would like to re-calibrate the device, follow the steps below:
1. Tap > Settings > System tab > Screen
2. Tap the Align Screen button and follow the on-screen instructions.
2.1.3 Lock/Unlock the device
Locking the device turns off keyboard functionality. This is a helpful feature if, for
example, the device is turned on and in your pocket, and you want to prevent
accidental key presses.
To lock the device, press the fn key followed by the Enter key. Once the device is
locked, the left soft key label changes to Unlock. You can also tap on the icon to
lock the device.