User Manual

Manual
Mercury
版 本 : 01
日 期 : 95/12/12
14
INVENTEC CORPORATION
英業達股份有限公司
1.4 Charging the Battery
1. To charge the battery, place the battery into the battery slot correctly. See
previous section for how to install the battery.
2. Do one of the following:
z Connect the device with the AC adapter and plug the AC adapter into a
power outlet.
z Connect the device to a PC with the USB cable.
1.5 Mini-SD cards
Mini-SD is one of the most popular formats for mobile devices. Your device contains
a mini-SD card slot in which you can expand the device’s memory up to 4GB.
Mini-SD provides functions such as built-in security for copyrighted content along
with great performance for storing music, video, and photographs.
Inserting a mini-SD card into the device
1. Lift the mini-SD card slot cover.
2. Insert the mini SD card with the logo side up and push into place until it
clicks down and is held in place.
3. Replace the mini-SD card slot cover.
Warning
The device contains a rechargeable Li-ion polymer battery completely discharged
and should be charged for at least 8 hours before first use. Use only
manufacturer-specified original batteries. Damages caused by using batteries not
specified by manufacturer are not covered under warranty.
Note
To charge the device with the USB cable, you must connect the device to a
functioning USB port on a PC that is powered on.