User's Manual

Maintenance
1. Keep it dry. Precipitation, humidity and liquid that
contains minerals will corrode electronic circuits.
2. Do not use or store it in dusty, dirty areas as its
detachable parts may be damaged.
3. Do not store it in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries,
and melt certain plastics.
4. Do not store it in cold areas. When the device warms
up, moisture can form inside it, which may damage
electronic circuit boards.
5. Do not attempt to take the device apart. Improper
handling may damage the device.
6. Do not drop, knock or shake it. Improper handling may
cause damage to the liquid crystal panel.
7. Do not use harsh chemicals, cleaning solvents, or
strong deter gents to clean the device.
8. Do not paint it. Paint can clog the device's detachable
parts and cause it to malfunction.
Items
1. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and
receiver.
--Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician
for help.
2. Modification, adjustment, and replacement of parts : Besta
is not responsible for unauthorized modification,
adjustment, and replacement of parts on this product. Any
such changes may void the warranty.
3. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
4. SAR Exposure Statement This EUT is compliance with
SAR for general population/uncontrolled exposure limits in
and had been tested in accordance with the measurement
methods and procedures specified in OET 65. This
equipment should be installed and operated with minimum
distance 0cm between the radiator & your body.
This device and its antenna(s) must not be co-located or
operating in conjunction with any other antenna or
transmitter. The County Code Selection feature is disabled
for products marketed in the US.
For product available in the USA markets, only channel
1~11can be operated. Selection of other channels is not
possible.
8
Caution
To assure continued FCC compliance:
Any changes or modifications not expressly approved by the
grantee of this device could void the user's authority to operate the
equipment.