User's Manual

CM-G100 Usermanual/Datasheet
Jun 08, 2009 Confidential Page 5 of 10
z When the module is installed into a host device, the FCC ID label must be visible through a window on the
final device or it must be visible when an access panel, door or cover is easily removed. If not, a second
label must be placed on the outside of the final device that contains the following text: "Contains FCC ID:
UPMJGW200001"
1.2 About Safety
z Do not disassemble or reconstruct or repair the card.
z Do not drop or strongly impact the card.
z Do not bend or press it.
z Do not wet it or touch it with wet hand.
z Do not touch the terminal part or score it.
z Do not conserve it in a direct sun light or a high temperature place.
z Do not conserve it in a damp or dirty place.
z Please conserve it in a place where children can not touch to avoid them putting the card in their mouths
accidentally.
z Please teach the content of this operation manual to your children when they use. And, please make sure
that they comply with the indication when using.
1.3 About Operation
z Please insert the card in proper strength.
z The product will be a little heating-up when using. It’s not an abnormal phenomenon.
z If a malfunction appears because of inserting the card into an uncorresponding product, our company
won’t be in charge of it.
z Please notice the static.
z Please clean with dry soft cloth when the card is dirty.
z Lost or Damage and so on will get a reimbursable service.
z There may be a modification of specification or function without a notification.
z Please conserve your information which inputted into the card in another memory. If the information
disappears unfortunately, our company won’t be in charge of it.