User Manual

ManualsBrandsInventec Appliances ManualsElectronics2.4GHz Access Point

Table Of Contents

Important Information
Regulatory Information
USA FCC Information Concerning Radio Frequency Interference
- Federal Communication Commission Interference Statement
- IMPORTANT NOTE: FCC Radiation Exposure Statement:
Europe - EU Declaration of Conformity
- Restrictions
- Canada - Industry Canada (IC)
- Exposure to Radio Frequency Radiation
Overview
- Hardware type
System requirements
- Minimum system requirements
- Other requirements
- Recommended items
Unpacking the boxes
- Classroom kit
- Student kit (up to 16 students)
- Individual kit
Assembling and charging the network hubs
- Removing the network connectors
- Checking the LEDs
Before you begin
- Installing
Setting up your TI-Navigator™ network the first time
- Before you begin
- Hardware type and Ethernet adapter type
- Connecting the cables to the access point
- Starting the wizard
- Identifying your hardware and selecting a channel
- Identifying the network connection
- Configuring an Ethernet port
- Configuring a USB port
- Setting up your classroom network
- Activating the access point
- Activating Type 2 network hubs
- Activating Type 1 network hubs
- Registering your TI-Navigator™ system
Installing the calculator operating system
Connecting the calculators to the hubs
Installing software Apps on the calculators
- Required
- Optional
Technical information
- Wireless access point
- Wireless network information
- Access point LEDs
- Battery information for wireless network hubs
- Storing the hubs
- Removing the battery pack
- Hub LEDs
- Network adapter settings
Troubleshooting
- Lost connections
- Calculator device not responding
- Messages
Resetting the Type 2 access point
Resetting the Type 1 access point
Texas Instruments Support and Service
- For general information
- For TI-Navigator™ technical questions
- For product (hardware) service
Battery Precautions for Calculators
Battery Precautions for Rechargeable Battery Packs
- Storage
Texas Instruments (TI) Warranty Information
- Customers in the U.S. and Canada Only
- Australia & New Zealand Customers only
- All Other Customers
TI LearningCheck 3.x License Agreement
- By downloading/installing this software and/or documentation, you agree to abide by the following provisions.
  - A
  - B
  - C
  - E
  - F
  - H
  - I
  - K
  - L
  - M
  - N
  - O
  - P
  - R
  - S
  - T
  - U
  - V
  - W

3. Connect the AC9926 power adapter to the power jack on the access

point, but don’t plug the power adapter into a power outlet

yet.

4. Connect the Ethernet crossover cable to the access point.

If your classroom computer has an available Ethernet port, you will use it

to connect to the access point. If not, you will use the network adapter

(USB-to-Ethernet).

Starting the wizard

A First Time Setup screen opens automatically when you complete the

installation of the TI-Navigator™ software. You are immediately

prompted to run the network setup wizard.

Note: If you want to run the Setup Wizard later, you will click

Start >

Programs > TI Tools > TI Network Manager

. When Network Manager

opens, or click Actions > Setup Wizard from the TI-Navigator™ menu.

Ethernet

crossover cable

plugs in here

AC9926 power

adapter plugs in

here

InstallationGuide.book Page 14 Wednesday, May 3, 2006 10:19 AM